Our Commitment to Quality

IT GOES BEYOND CERTIFICATIONS

We Take a Holistic Approach to Quality Including Accreditations, Certifications, and Systems to Meet Specifications and Regulations

Peters’ Heat Treating uses a Quality System from the moment we receive your parts until we get them back to you in order to ensure they are processed to your spec. Our proprietary Job Tracking System allows our team and customers to keep tabs on every part that moves through our facilities 24 hours a day, 7 days a week. Our Quality System is responsive and provides a feedback loop assuring that your parts are processed in a timely manner.

We have the required tools to solve any challenge, including an x-ray metallurgical analysis gun to provide fast, easy, accurate, and non-destructive alloy identification and elemental analysis. Our furnace processes are charted digitally and integrated into our Job Tracking System so that if questions arise, we can provide proof of processing.

Nadcap Aerospace Quality Management System (View Certificate)
- AC7004 – Nadcap Audit Criteria for Quality Management System
Nadcap Heat Treating / Aluminum / Carburizing / Hardness and/or Conductivity Testing / Pyrometry (View Certificate)
- AC7102/8 – Nadcap Audit Criteria for Heat Treating Pyrometry
  - AMS 2750 Pyrometry
- AC7102 – Nadcap Audit Criteria for Heat Treating (Aluminum)
- AMS 2759/1 – Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi
- AMS 2759/2 – Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi and Higher
- AMS 2759/11 – Stress Relief of Steel Parts
  AMS-H-6875 – Heat Treatment of Steel
- AMS 2759/11 – Stress Relief of Steel Parts

Nickel and Cobalt Alloys

AMS 2774 – Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts
AMS 5663 – Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 19Fe, Consumable Electrode or Vacuum Induction Melted 1775℉ (968℃) Solution and Precipitation Heat Treated

Stainless Steels, Precipitation Hardening

AMS 2759/3 – Heat Treatment, Precipitation-Hardening Corrosion-Resistant, and Maraging Steel Parts
AMS-H-6875 – Heat Treatment of Steel
AMS 2770 – Heat Treatment of Wrought Aluminum Alloy Parts
AMS 2771 – Heat Treatment of Aluminum Alloy Castings
AMS 2772 – Heat Treatment of Aluminum Alloy Raw Materials
AMS-H-6088 – Heat Treatment of Aluminum Alloys
AC7102/2 – Nadcap Audit Criteria for Aluminum Heat Treating
AC7102/3 – Nadcap Audit Criteria for Heat Treating – Carburizing
AMS 2759/7

AC7101/4 – Nadcap Audit Criteria for Materials Testing Laboratories-Metallography & Microindentation Hardness
- Near Surface Examinations – Microindentation (Surface Case Depth)
- Near Surface Examinations – Carburization/Decarburization
- Near Surface Examinations – Nitriding
- Microindentation – Microhardness (ASTM E384)
AC7102/5 – Nadcap Audit Criteria for Heat Treating – Hardness and/or Conductivity Testing (Internal processing support)
- ASTM E18 Hardness – Rockwell Hardness of Metallic Materials
- ASTM E110 Hardness – Rockwell Hardness of Metallic Materials by Portable Testers
- AMS2658 Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts
- ASTM E1004 Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method

ISO 9001:2015 (View Certificate)
Certified by NSF